Microplane creates extremely sharp teeth for fast, smooth, low-effort cutting. These blades may be hand held, like a file, or mounted in a standard 12" hacksaw frame. They are durable, non-clogging and rust-resistant.

Introducing the next generation of Microplane^® hand tools. R² Microplanes^® have Replaceable, Reversible blade inserts which may be turned for use on the pull or push stroke. These 31000 series inserts have been designed for a smoother finishing stroke than the 30000 series Microplanes^® . A completely new offset handle design adds increased versatility while combining a comfortable hand grip with a place to hold the tool at the end of the blade insert.

31001 R² Microplane^® with
30001 Fine-Cut Flat Blade Insert

Blade Length: 8"
Blade Width: 1"

31050 R² Microplane^® Fine-Cut
30050 Flat Blade Insert

Blade Length: 8"
Blade Width: 1"

31051 R² Microplane^® Fine-Cut
30051 Rounded Insert

Blade Length: 8"
Blade Diameter: 1"

31052 R² Microplane^® Fine-Cut
30052 Right Angle Insert Blade Width: 1 1/16"








Introducing Microplane^® Rotary Shaper Drill Attachments for low speed power shaping without clouding the air with dust. Works great on a drill press!

1200 RPM Maximum Speed - Not designed for use with a router!

In some conditions the Microplane^® Rotary Shaper cavities may become packed, which can cause overheating of the tool and loss of tooth set. To preserve the useful life of the tool, check for packing frequently by stopping and clearing the cavities BEFORE they become too tightly packed.

The likelihood of the tool becoming packed will depend on various conditions such as the material being cut and the cutting speed at which the material is removed. (For example: cutting parallel to the grain in soft cedar will make curly chips that will pack the cavities of the tool.)

30028 1" Microplane^® Rotary Shaper

Diameter: 1"

30027 1 1/2" Microplane^® Rotary Shaper

Diameter: 1 1/2"

30026 2" Microplane^® Rotary Shaper

Diameter: 2"

30001 Rigid Microplane^®
30001 for Hacksaw Frame

Blade Length: 12"
Blade Width: 1 5/16"

The rigid blade is not affected by frame tension. It is flat, stiff and fast cutting, even when hand held. The rigid blade is usually the best choice for quickly roughing out a shape or removing large amounts of material.

30002 Flexible Microplane^®
30002 for Hacksaw Frame

Blade Length: 12"
Blade Width: 1 5/16"

The flexible blade is best for smoothing convex surfaces and rounding sharp edges. If it is stretched tight in a hacksaw frame, it is flat and fast cutting. If the frame tension is decreased, the blade will bend slightly around a convex surface for a smooth blended cutting action.

30010 Half Round Microplane^®
30010 for Hacksaw Frame

Blade Length: 12"
Blade Diameter: 1 3/16"

The half round blade is the best tool for smoothing and shaping large inside curves. It also works remarkably well as a general purpose blade. The half round blade is nearly as stiff and fast cutting as the rigid blade.

30003 Two-in-One Saw Blade
30003 for Hacksaw Frame

Blade Length: 12"

The Two-in-One stainless steel blade fits standard 12" hacksaw frames. It cuts wood, plastics, composites and other nonmetallic materials. The patented process creates extremely sharp teeth that cut swiftly and accurately.

30021 Microplane^® Pocket Plane
30021 Replacement

Blade Length: 5 1/2"
Blade Width: 1 11/16"

We offer a replacement blade for the 5 1/2 inch Surform® 21-399 Pocket Plane. You've probably got it shoved way back in a drawer somewhere. Why not replace the old Surform^® blade with ours and finally get some use out of it?

30004 Microplane^® Surform^®
30004 Replacement

Blade Length: 9 7/16"
Blade Width: 1 11/16"

We offer a replacement blade for the 10 inch Surform^® 21-295 File and 21-296 Plane tools because we know that a lot of people own these tools and hate to throw anything away - even things that don't work very well. Now you can put a good blade in that old Surform^® tool and get your money's worth out of it.

Shave it, don't shred it. . .
. . .with Microplane^® graters.

It's all about flavor. Stainless steel, razor-sharp Microplane^® graters shave your fresh ingredients instead of ripping and shredding them. This results in finely shaved ingredients that maximize flavor while minimizing calories because you can use less. Another benefit is the ease of use. The exclusive patented Microplane^® process ensures that our graters stay razor-sharp. They slice through such tough ingredients like fresh citrus rinds, garlic, nutmeg, and parmesan with ease every time.

• Stainless Steel
• Razor-sharp cutters
• Easy to use
• Easy to clean
• Large surface area

35001 Microplane^® Coarse
35001 Grater with clear frame

Blade Length: 4 7/8"
Blade Width: 2"

Recommended for hard cheeses, onions, peppers, carrots, and other vegetables. Comes with comfortable plastic handle and attractive clear frame.

35002 Microplane^® Fine
35002 Grater with clear frame

Blade Length: 4 7/8"
Blade Width: 2"

Recommended for garlic, citrus rinds, and other zesting purposes. Comes with comfortable plastic handle and attractive clear frame.

30016S Microplane^® Spice Grater
30016S with wooden handle

Blade Length: 4 7/8"
Blade Diameter: 7/16"

Recommended for nutmeg and other fresh spices. Comes with attractive wooden handle and curved shaving surface.

30020S Microplane^® Zester/Grater
30020S with black handle

Blade Length: 8 1/2"
Blade Width: 1"

Recommended for hard cheeses, onion, peppers, and other vegetables. Comes with ergonomic handles and raised edges for easy measurement of your fresh ingredients.

30001S Stainless Steel
30001S Microplane^®Zester

Blade Length: 12"
Blade Width: 1 5/16"

Recommended for garlic, citrus rinds, and other zesting purposes. May be hand held or set across the top of a bowl.